Skip to content

Add panels to a vehicle

Cabin panel

You can define as many panels slot as you want.

1
2
3
4
<cabinPanels>
    <cabinPanel node="cabinPanel01" attacherJointIndices="1 3 4"/>
    <cabinPanel node="cabinPanel02" attacherJointIndices="5 6 7"/>
</cabinPanels>

Add panel hose connectors support

You can add some indoor hose connectors to connect panel hoses to vehicle.

The system is made with two points :

  • A node to create a hose between panel and indoor cabin
  • A node to create a hose between indoor cabin and attached implement

Note

You can use every hose tag from Farming Simulator, but you should use cabinPanel_indoor or cabinPanel_outoor

 1
 2
 3
 4
 5
 6
 7
 8
 9
10
11
12
13
14
15
<cabinPanels>
    <cabinPanel node="cabinPanel01" attacherJointIndices="1 3 4"/>
    <cabinPanel node="cabinPanel02" attacherJointIndices="1 3 4"/>

    <hoseConnectors>
        <hoseConnector>
            <indoor type="cabinPanel_indoor" node="indoorHoseConnector01"/>
            <outdoor type="cabinPanel_outdoor" node="outoorHoseConnector01" />
        </hoseConnector>
        <hoseConnector>
            <indoor type="cabinPanel_indoor" node="indoorHoseConnector02"/>
            <outdoor type="cabinPanel_outdoor" node="outoorHoseConnector02" />
        </hoseConnector>
    </hoseConnectors>
</cabinPanels>

Note

You can add many hose connector as you want.
Please consider minimum at least 2 per panel